Power Bush

Taper bushes are the cheap type are bushes Due to taper bushes are only half screw-thread, might cause the machine parts to have swinging issue, so must combined with G2.5 dynamic balancing, which is commonly used with v-pulleys and all type of couplings. Material: Steel(S45C, standard material), Stainless steel(SUS316), Cast iron(GG25, fragile) Produce inner bore and keyway according to ISO standard Transmission device from power horse 0~300HP Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.

Taper bushes are the cheap type are bushes Due to taper bushes are only half screw-thread, might cause the machine parts to have swinging issue, so must combined with G2.5 dynamic balancing, which is commonly used with v-pulleys and all type of couplings. Material: Steel(S45C, standard material), Stainless steel(SUS316), Cast iron(GG25, fragile) Produce inner bore and keyway according to ISO standard Transmission device from power horse 0~300HP Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.

Within all types of bushes, QD steel bushes are the most adaptable. Constructs with all screw-thread, can avoid the swinging issue for the machine parts. While using QD bushes, can avoid unnecessary installation error. Also the QD bushes have the least deformation, and with rather long lifetime. Can apply to all kinds of transmission parts. Material: Steel(S45C), Stainless steel(SUS304) Have adequate stocking for standard keyway Apply horse power range: 1~1000HP F type requires 3 screws to tighten or disassemble; D type requires 4 screws; E type requires 5screws Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.

LOCKs are bushes with no keybar connection, but with high tension bolts pulling, causing a strong connection between the rings and hubs. Commonly seen in medium or light mechanism use such as wind power generation, packaging machinery, printing machinery, CNC machine tools, automation equipment electronics factories, printing industry, high-speed output industry Suitable for various modular parts to be matched in low vibration mode (high vibration components must undergo dynamic balance correction to G2.5 level to avoid loosening) Material: Steel(S45C) Suitable power horse range: 1~500HP Anti-rust procedure Procedure: Can lower the radial jump Type: heavy-duty type, front stop type, flange fixed type, reduced mouth type, traditional type, universal type Common parts: flywheel, pulley Advantages: The use of expansion sleeves makes the manufacturing and installation of host parts simple; the expansion sleeves have a long service life and high strength; the expansion sleeves are easy to disassemble and have good interchangeability Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.