Power Couplings

Couplings have the characteristics of small structural size, light weight, small moment of inertia but high transmitted torque. They can effectively improve the operating quality and stability of machinery and extend the working life. The coupling buffers the vibration during transmission and absorbs the impact caused by the uneven operation of the power machine. It is suitable for high-load driving equipment such as: rolling mills, elevators, spline bushings, etc. This is the basic design, if needing superior version, can look for RU or GR couplings Material: Cast iron(GG25), Steel(S45C) Can be applied in general environment With small diameter and can be suitable for small motor Comes with a rubber in between Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.  

Elastic couplings have the characteristics of small structural size, light weight, small moment of inertia but high transmitted torque. They can effectively improve the operating quality and stability of machinery and extend the working life. The transmission is a zero-backlash design. The coupling buffers the vibration during transmission and absorbs the impact caused by the uneven operation of the power machine. Suitable for low, medium and high torque equipment, such as: rolling mills, elevators, spline bushings, etc.   Material: Aluminum, Cast iron(GG25), Steel(S45C), Stainless steel Can be applied in corrosiveness environment With small diameter but strong transmitting power Temperature resistance: -40~+100°C (Instant 120°C) Purple rubber are the most flexible, then red and then yellow. Other colours are not recommended. Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.

The rubber coupling is simple in design and easy to disassemble and assemble. You can choose a taper bush type HRC coupling, which is easy to disassemble and has high concentricity. With larger torque range used and close to the limit, dynamic balance must be done to level G2.5. It is suitable for chemical plants, generators, equipment with large axis vibration, etc.   Material: Cast iron(GG25) Suitable power horse range: 0.1~200HP With wide range of transmission field Can tolerance larger range of eccentricity Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.  

The chain coupling is composed of two rows of roller chains and sprockets. It has excellent transmission efficiency and can be used as a powerful flexible coupling for all common transmissions. Suitable for transmission in the rear section of the reducer, suitable for transmission below RPM100 Suitable for high-torque transmission of conveyor belts, excavators, pumps, mixers, etc.   Material: Steel(S45C), Stainless steel(SUS316) Suitable for rotors with lower and medium speed, and high vibration With larger torque force Temperature resistance: -10~+100°C Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.  

The NM coupling is simple in design and easy to disassemble and assemble. The transmission output belongs to medium and low torque. If it is used at high speed, dynamic balance must be done to level G2.5 to show the coupling efficiency. It is suitable for chemical plants, generators, equipment with large axis vibration, etc. Material: Cast iron(GG25), Ductile cast iron(GGG450~650) Suitable power horse range: 0.1~200HP Ductile cast iron can carry larger torque force Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.

The rubber structure, with screws as pillars, is a better designed coupling structure. Steel couplings are more recommended. Only after G2.5 dynamic balance can prevent the need to be corrected again after two years of use. A taper bush structure can be selected to improve concentric operation. Material: Steel(S45C), Stainless steel(SUS316), Cast iron(GG25) Can be applied in corrosiveness environment With larger torque force and lower vibration Temperature resistance: -40~+100°C (Instant 120°C) Suitable power horse range: 0~800HP Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.  

Also known as a safety coupling, the tyre coupling is simple in design and easy to disassemble and assemble; the tire can be replaced without moving the two half couplings. This type of coupling has the largest deflection angle, 2-20 degrees, and does not require laser alignment installation; it is the coupling structure with the lowest installation cost. Suitable for chemical plants, generators, and equipment with large axis vibrations. Its characteristic is that when the rubber sleeve is damaged, there will be no metal collision or sparks, which can avoid the risk of fire. Material: Steel(S45C), Stainless steel(SUS304) Suitable power horse range: 0.1~600HP With bigger transmission power Can tolerance larger range of eccentricity Safety: When the rubber is torn, there won’t be metal to collide and won’t have sparkle issue. Can prevent the danger of fire Made in Taiwan Feel free to ask and place order from us, even for the non-standard products.